Widget Image
Widget Image
© Asia Pacific Fire & MDM Publishing Ltd.
DRÄGER_escape_hood_Parat_APF_MAgazine_MDM_Publishing

New Escape Hood Series

DRÄGER has re-engineered its escape hood portfolio, with the result that its new Parat series are quick to don and protect the user from toxic industrial and fire-related gases, vapours and particles for at least 15 minutes.

In just three steps the Parat escape hood is ready for use. When opening the packaging the filter plugs are automatically released and the filter is deployed into its end position. The hood is then ready for use. The escape hoods are equipped with high-performance filters with a service life of eight years. Replacing the filter after that time increases the service life of the hoods to a total of 16 years. A protective seal on the opening of the packaging indicates whether it has been opened. Additionally, the filter is sealed tightly with two filter plugs.

The escape hoods are available in three versions: industrial escape hood Parat 4700; fire escape hood Parat 5500; and fire and industrial escape hood Parat 7500.

The industrial escape hood protects against toxic industrial gases, vapours and particles. It is approved in accordance with DIN 58647-7 for filtering escape devices. Additionally, the filter is tested according to EN 14387:2004 for gas and combination filters. It is available in a hard case or soft pack version. The fire escape hood protects the user against fumes, vapours and particles with a CO P2 filter. It is approved in accordance with EN 403:2004 for fire escape hoods and additionally tested for use against H2S (at a concentration of 2,500 ppm) according to DIN 58647-7. The Parat 5500 is available in a hard case, soft pack or single pack version.

The combined escape hood protects the user against toxic industrial and fire-related gases, vapours and particles with an ABEK CO P3 filter. It is approved in accordance with EN 403:2004 for fire escape hoods and DIN 58647-7 for filtering escape devices. Additionally, the filter is tested according to EN 14387-2004 for gas and combination filters. It is available in a hard case or soft pack version.

 

For more information, go to www.draeger.com

Share With:
Rate This Article
Tags